SKU: CYL-CIL-901-ATT
MPN: CIL-901
Cyclops CIL-901 Aurora Light Kit for Husqvarna Norden 901 (2022-)

Cyclops's CIL-901 Aurora Light Kit is made specifically for Husqvarna Norden 901 (2022-current) .

The Norden 901 kit transforms your bike by adding blinker and running light functions to your existing Fog light location, while also giving you real auxiliary lights.  Options are also available for versions that do not have the turn signal and dimmer functions.  If not using the dimmer, we activate the main beam via the factory high beam switch.

The Norden 901 kit uses the Cyclops 2-inch Aurora LED Aux-light with DRL (yellow halo-ring) and includes the New IQ-375 controller in a compact wiring harness. Once installed, the user can adjust the auxiliary driving light low beam intensity, adjust the pulsating conspicuous light mode, and use the halo-rings as turn signals and running lights. These adjustments are made through the OEM/Stock high/low beam switch and factory accessory light button. All settings can be turned On or Off based on the rider’s preference.  If the auxiliary light mode is selected the light will drop out when the blinkers are activated. This allows others to see your blinker clearly in the traffic pattern.

Our Norden 901 light harness is plug and play and connects directly into OEM/Stock electrical connections. We use the ACC1, ACC2, and the OEM/Stock Auxiliary light switch connector as plug in points. The blinker connections are Posi-Tap connectors that require no splicing or cutting of wires on your OEM/Stock blinker wiring harness. Additionally, there is no running wires back to the battery for power, allowing for a very straight forward install.

The Aurora lights offer superior distance to the factory fogs and reliability in a compact solution. Our DRL version (included in the Norden 901 kit) are available to keep you seen by others during daylight hours, as well as a much-needed forward lighting with an adjustable low beam setting for your nighttime Adventures

The New Cyclops Aurora 2-inch light set is rated at 4000 lumens, using an authentic top binned Cree XHP50 emitter, these lights pack a punch.

The Norden 901 kit uses the factory high beam switch to control the Aurora auxiliary lights, no additional switch is needed for your auxiliary lights. The DRL halo light option allows the Aurora to be used as a Daytime running light and turn signal (with the yellow halo ring).

The Norden 901 kit includes our newest Skene IQ-375 light controller and provides the user with a variety of auxiliary light dimming options. The controller/dimmer uses the factory High beam switch to allow you to adjust the low beam setting of the Aurora lights in 10% power increments from OFF up to 100% brightness, no other switches added to the bike.

The Aurora auxiliary light with yellow daytime halo ring has three different visibility options.

Default is Conspicuous mode-ON (The Aurora yellow halo ring will flutter with a patented conspicuity flicker)

High beam = Aurora diving lights at 100%, yellow ring shuts off

Low beam = Aurora diving lights off, yellow ring turns on with the Conspicuity flicker. (You can turn the flicker off)

Turn Signals - the Aurora yellow halo ring will ALWAYS default to a turn signal when the turn signal is used.

Daytime running mode-Conspicuous mode Off (The Aurora yellow halo rings stay solid yellow)

High beam = Aurora diving lights at 100%, yellow ring shuts off

Low beam = Aurora diving lights off, yellow ring turns on and stays solid

Turn Signals - the Aurora yellow halo ring will ALWAYS default to a turn signal when the turn signal is used.

Auxiliary Driving Light Mode (The Aurora driving lights are on, and yellow halo rings off)

High beam = Aurora diving lights at 100%

Low beam = Aurora diving lights at 50% or to your liking.

The low beam intensity is factory set to 50%, see Skene controller instructions to increase or decrease the intensity of your low beam.

Turn Signals - the Aurora yellow halo ring will ALWAYS default to a turn signal when the turn signal is used.