Purchase Corbin Y-TEN-7-CDS-E Canyon Dual Sport Seat(w/ Heat) for Yamaha Tenere 700 (2021-)

SKU: CBN-Y-TEN-7-CDS-E
MPN: Y-TEN-7-CDS-E
Corbin Y-TEN-7-CDS-E Canyon Dual Sport Seat(w/ Heat) for Yamaha Tenere 700 (2021-)

Name: Corbin Y-TEN-7-CDS-E Canyon Dual Sport Seat(w/ Heat) for Yamaha Tenere 700 (2021-)
Brand: Corbin Seats
SKU: CBN-Y-TEN-7-CDS-E
Price: 820 USD
Availability: InStock

$820.00

Custom Made for you. Ships in 2-4 weeks

Seating Panels:

Side Panels:

Welts:

Stitch Color:

Logo Color:

Special Notes:

Qty

Corbin's Y-TEN-7-CDS-E Canyon Dual Sport Seat(with Heat) is made specifically for Yamaha Tenere 700 (2021-current).

Features:

Measurements: Rider seating: 12.5" wide x 16" long x 3" deep
Passenger: 10.5" wide x 10.5" long
Corbin Canyon Dual Sport Saddle for Yamaha Tenere 700.
Shown with optional passenger backrest model #BR.
Maximized seating areas for two-up long range support.
More square inches of body contact means better weight distribution.
High density Comfort Cell foam provides a firm supportive ride and clean low profile.
Backrest installs easily with a single screw under the saddle and adjusts to passenger posture.
Sculpted narrow in the nose to provide good ground reach at stop signs.
Wide, dished seating eliminates pressure points and gives long range support.
Corbin Dual saddle gives a clean, flowing line with a subtle custom touch.
Neutralized seating platforms curb sliding in the saddle and help reduce fatigue.
Genuine leather seating and a host of color options are included at no additional charge.
Optional electric heated seating provides a nice luxurious touch on those chilly mornings.
Fits perfect to the bike and installs easily with brackets premounted on the saddle.
A variety of passenger backrest models are available to suit you taste and the amount of support desired. #BR model shown.
High density Comfort Cell foam gives a firm supportive ride and a clean, low profile.
Saddle mounts like stock and integrates with the Yamaha key lock system. Brackets are included and premounted on the saddle.

a person holding Front seat showing the back side heater wiring, MPN printed and mounting brackets pre-installed

Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
This is the Heated version, find the no Heat version from HERE.

Canyon Dual Sport saddle is designed specifically to provide long range comfort for your Tenere 7. We also offer a Bench style saddle that provides more freedom of movement for riders that lean towards off-road riding.

Our high density Comfort Cell foam allows a sleek profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, we sculpt the saddle narrow to allow for good ground reach. Canyon Dual Sport has a seat height between the Yamaha Rally seat and Yamaha Low seat.

Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. For additional comfort and feeling of security, the Corbin saddle works with an optional removable passenger backrest. Simple to install with just a single bolt under the saddle and fully adjustable to provide a tailored fit.

We offer several backrest models to suit your taste visually and the degree of support desired. For the best combination of looks and support, we used the #BR model Ovalbac backrest shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.

Notice how close the Corbin saddle fits to the tank, tail section and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal. We've made this seat design as low as possible without impacting ride comfort.

For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.

On top, we include genuine leather seating panels for a luxurious ride. The design shown above includes Black Carbon-Fiber leather seating with Matte Black vinyl contrasting sides and a tasteful color coordinated Smoke Gray welt. A wide variety of material and color options are available to suit your taste.

We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.

Corbin's saddle is designed to work with the optional Yamaha saddlebags and trunk. Please note, however, the passenger backrest will not work with the trunk carrier plate installed. Mounts to the motorcycle like stock and secures with the Yamaha key lock system. All brackets are included and premounted on the seat so it's ready for immediate installation.

This saddle cover has been updated to use our new backrest hardware cover with the sliding door as shown here. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.