Purchase Corbin Y-R-8-S Classic Solo Seat(no Heat) for Yamaha Raider

SKU: CBN-Y-R-8-S
MPN: Y-R-8-S
Corbin Y-R-8-S Classic Solo Seat(no Heat) for Yamaha Raider

Name: Corbin Y-R-8-S Classic Solo Seat(no Heat) for Yamaha Raider
Brand: Corbin Seats
SKU: CBN-Y-R-8-S
Price: 721 USD
Availability: InStock

$721.00

Custom Made for you. Ships in 2-4 weeks

Seating Panels:

Side Panels:

Welts:

Trim Panel:

Stitch Color:

Logo Color:

Special Notes:

Qty

Corbin's Y-R-8-S Classic Solo Seat(no Heat) is made specifically for Yamaha Raider.

Features:

Measurements: Classic Solo seating: 15" wide x 15.5" long
CLOSE Solo seating: 14.5" wide x 14" long
Pillion seating: 10.5" wide x 13" long
Rider Seat height: 26.5"
Back support w/ #02-S installed: 14"
Corbin Classic Solo saddle and Pillion for Yamaha Raider.
Classic Solo installs easily with hardware preinstalled on the saddle. Rear of saddle slides into place into your stock fender bracket. Then just lower the front of saddle and secure with the stock key lock.

a person holding Classic Solo seat showing the rear side, MPN printed, heater wiring harness and mounting brackets pre-installed

Passenger pillion pad also comes with brackets preinstalled and ready to mount. Just slide the saddle into place rear first to engage the fender bracket. Lower the front of the saddle and secure with the included bolts.
Electric seat heater comes preinstalled in the saddle and includes a wiring pigtail and adapters to wire directly into your Yamaha fusebox. A very simple installation with complete instructions included.
NOTE: Corbin Classic Solo does not work with the stock Yamaha passenger pillion pad. Solo and Pillion will not work with the Yamaha sissy bar system.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

A classy nostalgic look combined with excellent rider comfort and versatility. Corbin's Classic Solo is specially designed to keep a classic V-twin look on your Raider while providing generous, ergonomically designed seating. Additionally, both the Solo Saddle and Passenger Pillion seat accept a removable backrest for added comfort and support. Run the Solo by itself for a rugged, low look or add the passenger pillion for two-up cruising.

Classic Solo is available in two configurations. Our standard solo works for taller or average height riders while our Close solo is designed to provide an easier reach to the bars. Additionally, the Close model is shaped narrower in the nose with a lower seating platform to provide an easier reach to the ground. If you're unsure which model to choose, measure the rearmost position of your body relative to where the seat meets the tank. Compare this number to the measurements in the Special Notes section below.

Both the Solos and Pillion accept an optional Corbin removable backrest for added support. In the solo seat, you get a total of 14 inches of vertical support with #02-S backrest installed (shown). Corbin backrests are sculpted to fit the shape of your back and provide the maximum contact patch. Naturally they are fully adjustable to provide a tailored fit to your posture. Installation and adjustment is simple so you can use a single backrest transferred front to back as needed or order two for full time use.

All Corbin saddles are designed with what we call "Ergonomic Shaping". This means the saddle's seating area is shaped to fit the curve of your body and provide proper weight distribution. This also gives more square inches of body contact to help eliminate hot spots and centralized pressure. Neutralized platforms help to curb sliding in the saddle and reduce rider fatigue.

For an added bit of luxury on those chilly morning rides, Classic Solo is available with an internal seat heater. With a simple flip of the conveniently located switch, the saddle will warm up and maintain temperature automatically. Heater and controller are built inside the saddle and preinstalled. We include a wiring pigtail that integrates with your Yamaha wiring for simple installation.

Inside, our exclusive Comfort Cell foam provides a firm, resilient ride that lasts. Our foam is firmer than stock so it can support your body weight for long days on the road without breaking down. Over time, Comfort Cell will break in and take on your body shape for a personalized fit to your posture. Although Corbin seats feel firm when you first ride on them, it is this firmness that supports your body and helps the saddle work properly.

Because we have designed internal backrest hardware into the Classic Solo, we were unable to make this seat work with your stock pillion pad. If you prefer a totally solo look, you can mount the Solo by itself without a passenger pad. This makes a very clean look, but keep in mind you will have to remove the brackets from the rear fender. We've found that a couple of chrome button head screws make a nice plug for the holes that will be left where the brackets were.

Both saddles and backrest are richly tailored with genuine leather seating panels. For a custom look, we've designed the seating with a center stripe in either plain black leather, black faux-ostrich (shown) or grey faux snakeskin. Leather will provide a nice perch that breathes with your body and will break in along with the foam shape for a personalized fit. Just be sure to care for your leather saddle with a quality conditioner like our Saddle Cream.

Another custom option for your bike is a variety of backrest finishing plates for our Ovalbac models. Our standard finishing plates are ABS in: Leather look, Carbon-Fiber look, or primer. For a little extra, we can provide the finishing plates in chromed steel or even paint color matched to the bike.

New Backrest Hardware CoverThis saddle cover has been updated to use our new backrest hardware cover with the sliding door as shown here. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.