Purchase Corbin Y-MT07-18-GL Gunfighter & Lady Seat for Yamaha MT-07 (2018-)

SKU: CBN-Y-MT07-18-GL
MPN: Y-MT07-18-GL
Corbin Y-MT07-18-GL Gunfighter & Lady Seat for Yamaha MT-07 (2018-)

Name: Corbin Y-MT07-18-GL Gunfighter & Lady Seat for Yamaha MT-07 (2018-)
Brand: Corbin Seats
SKU: CBN-Y-MT07-18-GL
Price: 649 USD
Availability: InStock

$649.00

Custom Made for you. Ships in 2-4 weeks

Seating Panels:

Side Panels:

Welts:

Stitch Color:

Logo Color:

Special Notes:

Qty

Corbin's Y-MT07-18-GL Gunfighter & Lady Seat is made specifically for Yamaha MT-07 (2018-current).

Features:

Measurements: Rider seating: 14" wide x 14.5" long x 4.5" deep
Rear area: 9.5" wide x 15" long
Corbin Gunfighter & Lady saddle for Yamaha MT-07.
Gunfighter and Lady shown with optional backrest.
Generously sculpted seating platforms provide long range support.
More square inches of body contact equates to better weight distribution.
Passenger backrest provides an added level of comfort and security for your passenger. Easily adjusts to rider posture. Does not work with trunk rack in place.
If you're looking to add some convenient storage to your Yamaha, check out this nifty Glovebox addition that bolts to the rear of the Corbin backrest.
Glovebox provides secure storage for all your small travel essentials like spare gloves, bottled water, GDO remote and cell phone.
Designed to work with the Yamaha rack and trunk kit.
High density Comfort Cell foam provides firm support and a clean, tight profile.
Sculpted seating provides four inches of vertical back support and eliminates hot spots.
Built narrow in the nose to provide good ground reach at stop signs.
Dished seating relieves centralized pressure on your tailbone.
Built to work with the rear rack so there will be gaps on the side as seen here when no rack is used.
Neutralized seating platforms in both positions helps to curb sliding in the saddle and reduce rider fatigue.
Sliding door covers backrest hardware when not in use.
Genuine leather seating panels and a wide variety of colors and styles make for endless custom options at no extra charge.
Saddle installs like stock and integrates with the factory key lock system. Brackets included and premounted on the Corbin saddle.

a person holding Gunfighter & Lady seat showing the back side, MPN printed and mounting brackets pre-installed

saddle has been redesigned to work with the Yamaha Rear Rack / Top Case Mount.
Corbin backrest will not install with the Rear Rack / Trunk Case Mount in place.Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

Provides the perfect blend of rider comfort and custom styling. Gunfighter & Lady seat provides total comfort for you and a passenger on the MT-07. The sculpted riding positions disperse body weight across a greater area so you enjoy mile after mile of comfort. Neutralized seating platform curbs the tendency to slide towards the tank under braking which will help to reduce fatigue.

For even greater passenger comfort, Gunfighter & Lady accepts our optional removable backrest which adjusts to provide a tailored fit to co-pilot's posture. Simple to install with just a single bolt, the Corbin backrest is the most refined system available for your bike. Designed specially to support your passenger for the long haul and provide a nice feeling of security. Available in a range of styles to suit your taste (#02-S shown). Our Ovalbac models, like the one shown, even have rear finishing plate options for a more custom touch. Please note however, that the backrest system does not work with the rear rack installed on the motorcycle.

Corbin's patented molding and manufacturing process provides a precision fit to the tank and tail section while the whole saddle rides on rubber bumpers to protect the bike's paint. Inside, we use our exclusive Comfort Cell foam for firm support that lasts. Corbin saddles give a sporty, custom look yet still provide sport touring class comfort and ergonomic support.

Leather seating panels are included along with a range of color and material options. Shown here with Gray Bomber Jacket leather seating along with Matte Black vinyl side panels, Chrome welt and Medium Silver stitching. Leather gives you an excellent seating surface that breathes with your body and will conform with the foam shape during break in for a personalized fit to your posterior. Be sure to care for it with a quality conditioner like our Saddle Cream.

Rear area of this saddle has been redesigned with clearance to install Yamaha rear rack. This will leave open space (as shown) when a rack is not installed. Backrest hardware is included and built inside the saddle so there's no brackets to clutter up the look of the machine. This saddle works with our new Ovalbac design backrests for ultimate comfort and very cool looks. The #02-S model backrest (shown) comes coordinated to your saddle and even has removable rear finishing plates that offer further custom options.

If you're looking to add a little storage space to your bike, how 'bout that cool glovebox for the rear of your Ovalbac backrest (#02-SB & 297 models only). Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water and sunglasses. Constructed of durable ABS and available in unfinished black or prepainted gloss black for a little extra. Comes fully lined and weather stripped with two keys.

Saddle installs just like stock and integrates with the factory key lock. Includes all required brackets premounted on the saddle so it's ready for immediate installation. Optional backrests install into Corbin saddle with just a single bolt. Backrest adjustment can be made without removing seat from the motorcycle.

This saddle cover uses our new backrest hardware cover with the sliding door as shown above. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.