My Cart: 0 item(s)
![Corbin BMW-S10XR-CDS-E Canyon Dual Sport Seat(w/ Heat) for BMW S1000XR '15-'19 Corbin BMW-S10XR-CDS-E Canyon Dual Sport Seat(w/ Heat) for BMW S1000XR '15-'19](graphics/en-US/cssui/blank.gif)
Corbin's BMW-S10XR-CDS-E Canyon Dual Sport Seat(with Heat) is made specifically for BMW S1000XR (2015-2019).
Features:
- Measurements: Rider seating: 13.5" wide x 13" long x 4.5" deep
- Rear area: 12" wide x 10" long
- Approx seat height: 33.5"
- Corbin Canyon Dual Sport saddle for BMW S1000 XR.
- Excellent rider comfort and available passenger backrest.
- Generous seating platforms for increased comfort.
- More square inches of body contact means better weight distribution.
- Corbins Fibertech basepan provides a perfect fit to the BMW bodywork.
- Passenger rest installs with a single bolt and adjusts to rider profile.
- Corbin backrests accept an optional Glovebox to add convenient, locking storage to your bike.
- Corbin glovebox is perfect for your small essentials like bottled water, house keys, cell phone and spare gloves.
- Both rider platforms are sculpted ergonomically to disperse weight better and reduce hot spots.
- Provides a nice custom touch with color and material options included at no extra charge.
- Neutralized seating platforms curb the tendency to slide in the saddle.
- Built narrow and flatter in the nose to allow rider mobility.
- Dished seating provides four and a half inches of lower back support.
- Canyon Dual Sport is available with the option of electric heat for those chilly morning rides.
- Dished to eliminate centralized pressure and curb sliding forward toward rider.
- Genuine leather seating breathes with your body and provides a luxurious ride. Color and texture options included at no extra charge.
- Fits perfect and looks custom. On this model the Corbin logo is embellished with the BMW Motorad colors.
- Canyon Dual Sport installs like stock with two tabs in the front and a latch braket in the rear that integrates with your factory key lock.
![a person holding Canyon Dual Sport seat showing the back side heater wiring, MPN printed and mounting brackets pre-installed](graphics/00000003/68/corbin-bmw-s10xr-cds-e-canyon-dual-sport-seat-image18.jpg)
- We've provided space in the seat to secure your factory tool kit.
![shown space for Factory tool kit inside the seat](graphics/00000003/68/corbin-bmw-s10xr-cds-e-canyon-dual-sport-seat-image19.jpg)
- The Corbin saddle has been made as low as practical with a focus on comfort. Neutralizing the seating position on this motorcycle makes our Canyon Dual Sport slightly taller than the OEM unit.
- This saddle WILL work with the BMW trunk system.
- Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
Sport, Adventure and Touring all wrapped up in one bike... well played BMW! Although as capable and versatile as the S1000 XR may be, the stock bum padding seems only suited to the sportier end of this combination without the support needed for Asphalt Adventure or Touring. Corbin set out to fix this deficiency with our Canyon Dual Sport design.
Corbin's high density Comfort Cell foam allows a clean profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, we sculpt the saddle narrower to allow for ground reach.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. This gives your passenger excellent comfort. For additional comfort and feeling of security, the Corbin saddle works with an optional removable passenger backrest. Simple to install with just a single bolt under the saddle and fully adjustable to provide a tailored fit.
We offer several backrest models to suit your taste visually and the degree of support desired. For the best combination of looks and support, we recommend the #02-SB model Ovalbac backrest shown. This backrest provides a generous, contoured contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.
Notice how close the Corbin saddle fits to the tank and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal.
We've made this seat as low as practical with a focus on rider comfort and support. This makes the Corbin model taller than the OEM unit as we have taken out the downward slope of the stock seat. Neutralizing the seating area not only relieves pressure on a very sensitive area *ahem*, it also helps to reduce fatigue on wrists and knees.
For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's battery. All other components are built into the saddle and come preinstalled.
On top, we include genuine leather seating panels for a luxurious ride. The design shown above includes Black Carbon-Fiber leather seating with Asphalt vinyl contrasting sides with a tasteful color coordinated welt. A wide variety of material and color options are available to suit your taste. For an added custom touch, the embroidered Corbin logo in the side panel is dressed with the tri-colored bars of BMW.
We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.
Mounts to the motorcycle just like stock and secures with the BMW key lock system. All brackets are included and premounted on the seat so it's ready for immediate installation.
Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-SB backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.
LEATHER COLORS![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
LEATHER COLORS
![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS
![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
Specifications:
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.
COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.
Downloads
Installation InstructionsRelated Products
Best Sellers
Customers also Purchased
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
![Call or WhatsApp 786-242-5400 Call or WhatsApp 786-242-5400](graphics/00000003/71/contact-us-accessories-international-team.jpg)