Purchase Corbin BMW-S10XR-20-E Canyon Dual Sport Seat(w/ Heat) for BMW S1000XR '20-

SKU: CBN-BMW-S10XR-20-E
MPN: BMW-S10XR-20-E
Corbin BMW-S10XR-20-E Canyon Dual Sport Seat(w/ Heat) for BMW S1000XR '20-

Name: Corbin BMW-S10XR-20-E Canyon Dual Sport Seat(w/ Heat) for BMW S1000XR '20-
Brand: Corbin Seats
SKU: CBN-BMW-S10XR-20-E
Price: 820 USD
Availability: InStock

$820.00

Custom Made for you. Ships in 2-4 weeks

Seating Panels:

Side Panels:

Welts:

Stitch Color:

Logo Color:

Special Notes:

Qty

Corbin's BMW-S10XR-20-E Canyon Dual Sport Seat(with Heat) is made specifically for BMW S1000XR (2020-current).

Features:

Measurements: Rider seating: 13.5" wide x 13.5" long x 4" deep
Rear area: 10" wide x 9.5" long
Corbin Canyon Dual Sport saddle for BMW S1000 XR.
Excellent rider comfort and available passenger backrest.
Generous seating platforms for increased comfort.
More square inches of body contact means better weight distribution.
Provides a nice custom touch with color and material options included at no extra charge.
Built narrow and flatter in the nose to allow rider mobility and ground reach.
Dished seating provides four and a half inches of lower back support.
Passenger rest installs with a single bolt and adjusts to rider profile.
Neutralized seating platforms curb the tendency to slide in the saddle.
Dished to eliminate centralized pressure and curb sliding forward toward rider.
Genuine leather seating breathes with your body and provides a luxurious ride. Color and texture options included at no extra charge.
Dished passenger plaform provides better support and helps curb sliding forward.
Canyon Dual Sport is available with the option of electric heat for those chilly morning rides.
Backrest installs easily into hardware concealed by this sliding door in the rear. Secures with a single bolt under the saddle.
Canyon Dual Sport installs like stock with two tabs in the front and a latch braket in the rear that integrates with your factory key lock.

a person holding Canyon Dual Sport seat showing the back side heater wiring, MPN printed and mounting brackets pre-installed

If you opt for electric heated seating, we include this pigtail that integrates with a BMW fuseblock. All other components including come preinstalled in the saddle.
The Corbin saddle has been made as low as practical with a focus on comfort. Neutralizing the seating position on this motorcycle makes our Canyon Dual Sport slightly taller than the OEM unit.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
This is the Heated version, find the no Heat version from HERE.

Sport, Adventure and Touring all wrapped up in one bike... well played BMW! Although as capable and versatile as the S1000 XR may be, the stock bum padding seems only suited to the sportier end of this combination without the support needed for Asphalt Adventure or Touring. Corbin set out to fix this deficiency with our Canyon Dual Sport design.

Corbin's high density Comfort Cell foam allows a clean profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure and "bunching" felt from the stock seat. In the nose area, we sculpt the saddle narrower to allow for ground reach.

Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. This gives your passenger excellent comfort. For additional comfort and feeling of security, the Corbin saddle works with an optional removable passenger backrest. Simple to install with just a single bolt under the saddle and fully adjustable to provide a tailored fit.

We offer several backrest models to suit your taste visually and the degree of support desired. For the best combination of looks and support, we recommend the #BR model Ovalbac backrest shown. This backrest provides a generous, contoured contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.

Notice how close the Corbin saddle fits to the tank and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal.

We've made this seat as low as practical with a focus on rider comfort and support. This makes the Corbin model taller than the OEM unit as we have taken out the sling shaping of the stock seat. Neutralizing the seating area not only relieves pressure on a very sensitive area *ahem*, it also helps to reduce fatigue on wrists and knees.

For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.

On top, we include genuine leather seating panels for a luxurious ride. The design shown above includes Black Natural grain leather seating with Matte Black vinyl contrasting sides with a tasteful color coordinated welt. A wide variety of material and color options are available to suit your taste. For an added custom touch, the embroidered Corbin logo in the side panel is dressed with the tri-colored bars of BMW.

We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.

Mounts to the motorcycle just like stock and secures with the BMW key lock system. All brackets are included and premounted on the seat so it's ready for immediate installation.

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.