SKU: ET650-7524-00-01
MPN: 650.7524 00 01
Hepco & Becker 650.7524 00 01 Lock-it Side Carrier Asymmetrical for KTM 1290 Super Adventure '15-'20

Hepco & Becker's 650.7524 00 01 Lock-it Side Carrier Asymmetrical Version is made specifically for KTM models listed.

The Lock-it System is an innovative design from Hepco & Becker for mounting side cases to your bike while having the option to remove the mounting frames and return to the original look and style of your bike in a matter of seconds.

Many riders do not use their luggage all the time, especially on short or daily rides, and would prefer not to have the mounting frames installed for reasons of aesthetics as well as practicality. The solution is the Lock-it system. There is a small initial attachment plate that is simply bolted to your bike without any drilling necessary. From that attachment plate, you simply attach the mounting frames using quarter-turn Lock-it fasteners. These fasteners have an Allen head pattern allowing for quick installation and removal of the side carriers, leaving you with an almost original look bike when not installed.

ach bike has its own custom made system specific to that one model. All the Lock-it mounting systems will accept all of the hard side cases offered by Hepco & Becker. Anti-theft protection is available as an added security feature thanks to the lockable Lock-It system fastener (151.050). These locks replace the standard Lock-it fasteners requiring a key to install and remove the mounting frames.

This version is asymmetrical which means it is designed to fit as close to the bike as possible. The actual location of this side carrier puts the top of the side cases just below the passenger grab rails. Compared to the symmetrical version (650.7519 00 01) the side cases are much higher up on the bike and further out width wise. On the right side of the bike, the case is also pushed in closer to the exhaust with about half an inch of space to spare. Hepco & Becker 650.7519 Lock-it Side Carrier to purchage symmetrical version.

Because of the offset, most people put a smaller case on the left and a larger one on the right which creates an enduro set but do not have to. This is only possible using the Xplorer or Junior style side cases because they come in two different sizes besides just one size like the Gobi cases. From a personal opinion, we would recommend this side carrier for your KTM if you are traveling solo on a long trip because it puts the center of gravity lower to the bike and creates an almost flat service where it will be easier to strap items down. The symmetrical version creates more of an armchair like seat for the passenger as the cases are higher up. This version is asymmetrical which means it is designed to fit as close to the bike as possible. The actual location of this side carrier puts the top of the side cases just below the passenger grab rails. Compared to the symmetrical version (650.7519 00 01) the side cases are much higher up on the bike and further out width wise. On the right side of the bike, the case is also pushed in closer to the exhaust with about half an inch of space to spare. Because of the offset, most people put a smaller case on the left and a larger one on the right which creates an enduro set but do not have to. This is only possible using the Xplorer or Junior style side cases because they come in two different sizes besides just one size like the Gobi cases.

1050 Adventure (2015-)

1190 Super adventure / R (2013-)

1290 Super Adventure / R / S / T (2015-2020)

1090 Adventure / R (2017-)