D&D's 525-31 Fat Cat 2:1 Full System Exhaust is made specifically for Harley-Davidson Dyna (1995-2005).
Fat Cat 2:1 Fat Cat is a stepped header system at the head is 1 3/4" to 1 7/8" at collector and 2 1/2" where the muffler goes to the header. All full systems are equipped with heat shields, bolt kit, brackets, exhaust gaskets and baffles. Each exhaust system is designed and dyno tested in our facilities. All of our testing is done with Harley SE Tuner. Every pipe is designed to increase low-end torque and horsepower. Performance increases are about 8 to 10 percent with the proper tune on the bike. Upswept muffler for better ground clearance.
Baffles Louvered baffles are for 80" to Stock 103" motors Perforated Wrapped baffles are for Stage 4 103" to 113" motors Note: The inter core of the Louvered baffle is 2 1/4" Note: The inter core of the Perforated Wrapped baffle is 2 1/2" 582Z-31FB-32FB does have 12mm and 18mm 02Bungs in the header pipe All Dyna's have to be tuned with the full system.
Note: Using Woods cams for the best performance use Perforated Wrapped Baffle.
At idle, the motorbike is deep, boomy and full of character. Not only does the pipe look good, it is a wonderfully sounding experience for the rider.
Note: Blueing and Discoloration are caused by Improper Tuning and will not be covered under Warranty. D&D Performance Exhaust Systems are designed for close course racing applications only. Not for use on pollution controlled vehicles. D&D Performance Exhaust Systems are designed for close course racing applications only. Not for use on pollution controlled vehicles.
Note: Does not meet CARB (California Air Resources Board) emissions standards. For "Competition" use only
Downloads
Installation InstructionsBest Sellers
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞