SKU: CYL-CIL-T7-ATT
MPN: CIL-T7
Cyclops CIL-T7 Aurora Auxiliary Light Kit for Yamaha Tenere 700 '19-

Cyclops's CIL-T7 Aurora Auxiliary Light Kit is made specifically for Yamaha Tenere 700 (2019-current).

Now available with the New programable Skene dimmer, adjust your low beam from off to 100% without adding any switches! There simply is not a better way to operate auxiliary light low and high beams on the T700

After all, using a rheostat to adjust your low beam is like going back to the Dark ages. There is a far better way, The Skene way!

Also available is the new Skene IQ-375 dimmer option, this will allow the Aurora DRL rings to become additional turn signals and offer the patented conspicuity flicker. The flicker will make you much more visible to other drivers.

This option also includes a handlebar mounted switch that will toggle in-between auxiliary light mode and conspicuity mode. In conspicuity mode you have the DRL rings on and in high beam the main aux light comes on. In Auxiliary light mode there is a low beam set at 50% intensity and a high beam, all with the factory switch. The blinker will always take priority and drop the auxiliary light out when activated.

When usefulness and quality matter the Cyclops Auxiliary light kit for the Yamaha Tenere T7 comes shining through and leaves the competition in its wake.

The usefulness of having lights that turn direction with the bars can be very beneficial, perfect for those evenings that might have gone a little long and you need to set up camp or pick your way through a tighter section of trail. .

Usefulness from having the ability to run daytime running lights and have full control of low beam settings as well as a switch to disable the system leaving only DRLs on. (Dimmer with cutout switch)

Simplicity for those that don't want to add ANY switches to their bikes, you can choose to have the aux lights activated in a reduced power on low beam from off to100% in 10% increments and high beam (100%) via the factory high beam switch by choosing the dimmer option with no switch. We don't like extra switches on our already cluttered bars, Do YOU?

Or have the lights on in high beam and off in low beam, with no switches.

If choosing the DRL version, DRLs will be on with the key. by choosing a switch you can disable the main auxiliary lights leaving only the DRL ring on during the daylight. Then at night, flip the switch and have full control of your main auxiliary lights activating in conjunction with your bikes high and low beam, this works very well with the ON with high beam OFF in low beam, No switch option. 

With this Cyclops kit you can choose what works best for you.  

Benefits of a 100% plug and play setup utilizing all factory Yamaha connectors. If using diming, The high beam wire does use a positap, By far the best way to tap into a wire without causing damage, no tools required.

The basic kit uses our tried-and-true Aurora 2-inch dia 19 watt (38 for the set) light kit, All CNC machined, polycarbonate lenses and super lightweight. Each light is rated at 2000 lumens (4000 for the set) with a 15-degree optic throwing a light beam nearly 500 ft 

You can choose the DRL or non DRL version.

If no dimmer option is chosen the kit will come with a switch to turn the lights on or off, If you chose the dimmer option, you can install the lights with No switch, The auxiliary lights will work in conjunction with the factory headlight, Low beam is set at 50% upon shipping and can be adjusted in 10% increments.

With the DRL option, you can also choose the cutout switch, this will disable the system, this works well with the DRL, allowing you the ability to turn the main aux lights off and run with only the DRL halo rings. 

  

We offer mounts for the stock low fender or the Camel ADV high fender kit.

Emark certified for your confidence when riding in countries that require this certification.