Call or WhatsApp 786-242-5400 | Mon-Fri 9-5 EST

Product Search

    Secure Checkout
    Corbin T-R3-8T-DT-E Dual Tour Seat(with Heat) for Triumph Rocket III Touring '08-'18
      Corbin T-R3-8T-DT-E Dual Tour Seat(with Heat) for Triumph Rocket III Touring '08-'18
      Purchase Corbin T-R3-8T-DT-E Dual Tour Seat(with Heat) for Triumph Rocket III Touring '08-'18

      SKU: CBN-T-R3-8T-DT-E
      MPN: T-R3-8T-DT-E
      Corbin T-R3-8T-DT-E Dual Tour Seat(with Heat) for Triumph Rocket III Touring '08-'18

      $998.00

      Custom Made for you. Ships in 2-4 weeks
       
      Corbin's T-R3-8T-DT Dual Tour Seat(no Heat) is made specifically for Triumph Rocket III Touring (2008-2018).

      Features:
      • Measurements: Rider Seating: 15" wide x 15.5" long
      • Passenger: 13" wide x 14" long
      • Approx. seat height: 27"
      • Corbin Dual Tour Saddle for Triumph Rocket III Touring.
      • This saddle is designed specifically to fit the Triumph Rocket III Touring model and does not fit the standard or Classic models of the Rocket III.
      • Installation: Dual Touring Saddle installs easily with brackets premounted on the seat. We do not use a snorkel over the airbox and instead let the bike pull air from the entire under seat area (this actually frees up airflow). Since the Corbin basepan forms over the edges of the frame, you needn't worry about water intrusion either.
      • To mount saddle, simply slide it into place nose first and secure the rear of the seat to your fender reusing the stock bolt.
      • We recommend removing the seat from the bike when washing. In the case of the Rocket III, remember to cover your airbox when doing this to stop water from getting into the airbox!
      • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
      Often imitated, but never duplicated, Corbin's popular Dual Tour is available for the Rocket III Touring model with the option of electric seat heaters! This seat provides you and a passenger with the most comfort and support available. Our sculpted seating gives proper weight distribution to allow long range comfort. Generously contoured platforms eliminate hot spots and centralized pressure that causes discomfort. On the inside, Corbin's exclusive Comfort Cell foam material gives firm support that conforms to your body for a personalized fit. Naturally, we keep a nice flowing line on the bike that integrates with the vintage theme.

      Built up on Corbin's Fibertech base material that fits perfect to every arc and contour of the machine. This rigid base gives the saddle a firm foundation to support the carefully designed ergonomics of the foam shape and provides the structural support to allow for dual backrest integration. Basepan rides on rubber bumpers to protect the paint job.

      Corbin's Dual Touring Saddle accepts two optional removable rider's backrests and also works with the Triumph Sissy Bar or Corbin Trunkbox in the rear. Backrests are fully adjustable for a tailored fit to your posture and install or remove easily as desired. In the front we have engineered the backrest to fold down to make it easier to mount your bike. This special hardware (built into the saddle) also allows the backrest position fore and aft to be adjusted to your stature. Once the backrest is installed, both of these adjustments can be performed without removing the saddle from the motorcycle.

      Naturally, you can use a single Corbin backrest that transfers front to back as needed or get two backrests for full time use. Installation of the Corbin backrest is easy enough to make this possible at a moments notice. Simply slide the backrest shaft into the built in hardware and secure it in place with the provided set screw.

      The ergonomic design of the Dual Touring saddle also gives a nice flowing shape on the Rocket for a clean look. Inside the saddle, Corbin's Comfort Cell foam provides a nice firm perch that supports your body indefinitely and doesn't cave in like softer materials. Comfort Cell feels firm when you first ride on it, but it is this support that gives you day long comfort. That's why we always say "Firm is a good thing".

      We use genuine leather seating panels for a luxurious ride that breathes with your body. Leather is extremely durable and will break in along with the foam shape to conform to your body. Dual Tour comes standard with natural grain Black Leather seating and Asphalt vinyl side panels for a subdued look that still appears custom. Tasteful stitch pattern in the seating areas adds a nice bit of flair.

      This seat model also offers the option of electric heated seating. A single switch controls the heat for both the rider and passenger positions. The switch is conveniently located along the left side of the saddle so you can reach it without taking your hand off the throttle. The two position switch allows you to select a heat level depending on conditions. Level of heat is controlled automatically by a thermostat built into the control unit. Very simple to install into your stock wiring.

      As a final bit of customization, Corbin's Ovalbac model backrests have interchangeable finishing plates on the rear. We've used the standard leather look style here, but there are a variety of options to suit your taste. If you're looking to add a bit of convenient storage, the rear finishing plate can be replaced wtih the Corbin exclusive Glovebox. This adds four liters of locking storage that is perfect for maps, cell phones, bottled water and other small travel essentials. Comes fully lined and weather stripped to protect cargo. Available in plain black ABS or prepainted gloss black for a little extra. See Accessories tab for ordering.

      Installs easily on your bike with a tongue in the front and a single bolt in your fender at the rear. If you opt for electric heat, we include a wiring pigtail that integrates easily with your Triumph fusebox. All other heater components come preinstalled on the saddle.

      LEATHER COLORS

      VINYL COLORS


      *Samples available on request. Don't hesitate to contact us.*

      It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

      Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

      Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

      Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

      Specifications:

      UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

      FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

      COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

      ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

      PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

      GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.

      Downloads

      Installation Instructions


      Related Products


      Best Sellers


      Connect with our Team
      Questions?

      Call or WhatsApp: 786-242-5400 📞

      Call or WhatsApp 786-242-5400