Name: Corbin T-R3-20-BAG Fleetliner Saddlebag / Fender Kit, Single Color for Triumph Rocket 3 '20-
Brand: Corbin Seats
SKU: CBN-T-R3-20-BAG
Price: 2551 USD
Availability: InStock

Corbin T-R3-20-BAG Fleetliner Saddlebag / Fender Kit, Single Color is made specifically for Triumph Rocket 3 (2020-current).

Features:

Capacity: 45 liters left side / 54 liters right side
Overall width: 39 inches
Door opening: 10" x 16"
Rocket 3 Saddlebag set painted with GT graphics.
Designed to emulate the tank and tail for integrated visuals.
Fits close to the centerline of the bike for good center of gravity.
Right side bag will hold an adult size full face helmet.
Gives a balanced and complete look to the Rocket 3.
Saddlebags work with factory seat of any of the Corbin models.
Clean, flowing shape hides the impressive volume.
Combined capacity of 100 liters. Right side holds slightly more than left side to allow clearance for swingarm.
Perfected fit keeps the design tight to the bike with perfect visuals.
Set includes Corbin undertail kit which relocates license plate and turn signals.
Front section of the bags is clearanced for your fold out footpegs.
Hand painted to match factory paint in single color or with graphics.
Built in lock latches keep the look clean and smooth.
Installation is simple using hardware and brackets that are included. Stock turn signals are used and relocated to our undertail kit. Minor wiring is required. Suitable for an average weekend mechanic, complete instructions included.
Fleetliner saddlebags install using a proprietary bracket that mounts to your Rocket in existing locations under the tail section. Includes Corbin undertail / fender kit.
Corbin saddlebags come complete with lining and weather stripping preinstalled and doors/locks pre-mounted. Basically, take 'em out of the box and install on your bike!
When loading items inside the bags, it is best to load heavy items closest to the bike for best load bearing and balance. It is important to load items like disk locks carefully. If you throw an item like this into one of the bags, it can create pressure cracks in the paint on the outside of the bag.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

Polyurethane & ABS Construction: Saddlebag bodies are manufactured of a specially designed polyurethane material for durability and a clean finish. Provides for very tight tolerances with minimal shrinkage so each part comes out true to the original design. Saddlebag doors are constructed of thermoformed ABS.

Finish: Corbin bags are hand finished and painted to coordinate with your factory colors. Available in a single color or coordinated with multiple color paint jobs.

Saddlebag Interior: Corbin Bags come fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking doors keep contents secure.

A little careful design work by the Corbin Wizard's and our new Fleetliner Saddlebags provide a more balanced visual while adding some much needed storage. How much storage? A whopping 100 liters with both bags combined. For those not yet commited to the metric system, that equates to over three and a half cubic feet!

If you haven't flipped through the photos at the top of the page yet, that's an adult full face helmet shown in the right side saddlebag! Yeah, that's a lot of storage room. The left side is slightly smaller to make room for the Rocket swing arm but still may hold some helmets (but not the XXL Aria that we tried).

Our saddlebags are designed to fit specific bike models so they're visually integrated and look awesome! Notice how the Corbin bags mimic the shape of the fuel tank and follow the graceful line of the tail. This helps the bags actually enhance the look of the bike rather than just being an add-on. We also design our saddlebags to fit close to the profile of the Rocket for improved weight handling and aerodynamic efficiency. As you can see, the integrated shape provides a look far cleaner than "one shape fits all" style hard luggage.

We mold the bags close around the fender rails and in tight to the fender. This allows the bags to carry weight in close where it won't upset your balance. When loaded properly, you won't even know they're back there while you're riding and the bike remains stable at all speeds. This design also keeps a narrower profile for less width to worry about when lane splitting. Our design team shaped these bags to work with your stock exhaust system, but they will work equally well with any system that has a profile low like the stock pipe.

Corbin's Rocket 3 saddlebags will work with accessories mounted on top of the fender like the sissy bar shown. Our bag set will also work with either of the Corbin seat models or with your factory seat.

The Fleetliner saddlebag set INCLUDES Corbin's undertail kit which helps keep a tidy look at the rear. This component moves your license plate up under the tail light and gives a little more length to the tail section. Both the rear fender and saddlebags come hand prepainted to coordinate with your factory paint scheme. Saddlebags are available in a single color or with coordinating four color GT graphics. All saddlebags also include a durable chip resistant black epoxy paint on the wheel facing surface.

Both bags come completely lined to protect your cargo and feature locking doors for security. Molded to fit perfect with your stock turn signals relocated to our undertail. Sure seal weather stripping and adjustable lock keeps them watertight. Doors feature a soft open strut so the doors won't slam down when unlatched. Saddlebag doors are two-layer theroformed rigidity and finished on both sides to look nicer open or closed.

Installation is fairly simple with all required mounting brackets included and no drilling or chassis modifications required!

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.