My Cart: 0 item(s)
![Corbin I-SCT-DT-E Dual Touring Seat, Heated for Indian Scout / Sixty (2015-) Corbin I-SCT-DT-E Dual Touring Seat, Heated for Indian Scout / Sixty (2015-)](graphics/en-US/cssui/blank.gif)
Corbin's I-SCT-DT-E Dual Touring Seat, Heated is made specifically for Indian Scout / Sixty (2015-current).
Features:
- Measurements: Rider seating: 12.5" wide x 13.5" long x 5" deep
- Rear area: 10.5" wide x 11" long
- Approx seat height: 28.5"
- Corbin Dual Touring saddle for Indian Scout.
- Clean, classic lines and comfort for two.
- Maximized seating positions provide excellent support.
- Corbin's Dual Tour works with the Indian accessory sissy bar and backrest pad.
- More square inches of body contact means better weight distribution.
- Works with an optional backrest in both the rider's and passenger's seating positions.
- Use a single backrest transferred front to back as needed or two for full time use.
- Our Dual Tour is designed to set you in the sweet spot on the bike. Many riders opt for custom bars to enhance the overall ergonomics of the Scout.
- Corbin backrests install and remove easily with a single bolt under the saddle.
- Backrests easily adjust to riders posture without removing them from the seat.
- For a little convenient locking storage, add Corbin's glovebox option to the rear of your backrest.
- Dished seating areas conform to your body ergonomically to eliminate hot spots.
- Optional electric seat heaters provide a touch of luxury on those chilly morning rides.
- Saddle installs with a single bolt into your fender. For tool free installation use one of our thumbscrews.
- Includes genuine leather seating and a host of color and texture options at no extra charge.
- Neutralized and sculpted seating eliminates the tendency to slide in the saddle.
- Built narrow in the nose to allow for good ground reach at stop signs.
- Saddle installs easily with a tongue in the front and a single screw into your fender at the rear. If you opt for electric heat, we include a wiring pigtail that connects to your battery. All other components come preinstalled in the saddle.
![a person holding Dual Touring seat showing the back side heater wiring, MPN printed and mounting brackets pre-installed](https://www.accessoryinternational.com/merchant2/graphics/00000003/70/corbin-i-sct-dt-dual-touring-seat-no-heat-image18-short.jpg)
- Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
- This is the Heated version, find the no Heat version from HERE.
Insist on a geniune Corbin saddle to improve the comfort, feel and looks of your Indian. Our Dual Touring saddle is just what you need to maximize the long range capabilities of your Scout with enhanced comfort for two. Our ergonomically shaped seating gives you excellent support for the long haul. The only reason you'll find for stopping is the need for fuel.
Designed to work with a Corbin backrest in the rider and/or passenger seating positions or with the Indian sissy bar. Corbin backrests are supported by internal hardware for a very clean look and simple, one-bolt installation. You can order a single backrest and transfer it front to back as needed or get two for full time use. Backrest angle adjusts to provide a personalized fit to rider posture in both positions. With backrest installed, the rider bucket offers 15 inches of vertical support!
In the images above, we show Ovalbac backrest model #02-SB that offers excellent contoured support with a clean modern look. This design also provides a convenient hand hold for your passenger or while moving your bike around the garage. You can review all of the backrest models Corbin offers by clicking on the "Accessories" tab.
Notice how both seating platforms are sculpted to fit the shape of the human body and seat the rider into the bike. This is what we call "ergonomic" design and it is one of the critical features of the Corbin saddle. Wide, dished platforms create more square inches of body contact and longer lasting support without hot spots. Seating position provides good ground reach and makes you feel more integrated with the bike. Corbin seating is slightly further back and higher to provide good, relaxed ergos. Inside, our exclusive Comfort Cell foam provides a firm, resilient ride that lasts. Over time, Comfort Cell will adapt to your body and provide a personalized fit for even greater comfort.
As with most Corbin saddles, this model uses genuine leather seating panels for a ride that breathes with your body. Luxurious and durable, leather will provide comfort for many years and will break in along with the foam shape for a personalized fit to your posture. Available decorated to your taste with a host of options in materials, colors and textures. Shown here we used our Tan Bomber Jacket leather which coordinates with the factory material but it not a perfect match.
For those chilly morning rides we offer an option of heated rider seating. We incorporate a heater unit under the leather seating and a switch on the left side of the saddle (so you can turn it on without removing your hand from the throttle). Just flip the switch and the seats will warm up and maintain temperature automatically. Corbin's heater comes completely pre installed in the saddle and you need only integrate the included pigtail to your battery.
Notice how the saddle is designed to fit perfectly to the tank, chassis and fender... Corbin's Wizards have mastered where the leather meets the metal. This kind of fit is available only in genuine Corbin saddles through our patented Integrated Molding system. This process allows us to engineer extremely tight tolerances and fit complex shapes like the beautiful, flowing fender.
Need more options? Our #02-S model backrests have removable finishing plates on the rear available in a range of styles. The standard plate is a black ABS leather look, but we can also provide one with a carbon-fiber look or primer and ready for your custom painter. For just a little extra, we can provide the finishing plate on your backrest prepainted gloss black or chromed steel. These make a perfect finishing touch.
Installation is similar to OEM and uses a tongue in the front and a single bolt into your fender at the rear. For tool free installation, use one of our thumbscrews in this location. Your Scout uses an #ACST-8M in this spot. If you opt for electric heat, the saddle will include a pigtail wire that integrates directly with your Indian's battery (complete instructions included).
We have found the Scout to be a bit long for most riders despite it's reasonable size. We have positioned the rider bucket in the sweet spot on the bike and could really tell that it's a stretch to the bars. On Mike's Scout we installed a set of adjustable pull-backs from Helibar (#HZ15100SS). These bars are taller than stock and have a rear adjustable offset while still using all of the stock cables and hydraulics. We found these to be the final piece of the ergonomic puzzle on the Scout!
If you're looking to add a bit of convenient storage, the rear finishing plate can be replaced wtih the Corbin exclusive Glovebox. This adds four liters of locking storage that is perfect for maps, cell phones, bottled water and other small travel essentials. Comes fully lined and weather stripped to protect cargo. Available in plain black ABS or prepainted gloss black for a little extra.
LEATHER COLORS![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
LEATHER COLORS
![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS
![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
Specifications:
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.
COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.
Downloads
Installation InstructionsRelated Products
Best Sellers
Customers also Purchased
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
![Call or WhatsApp 786-242-5400 Call or WhatsApp 786-242-5400](graphics/00000003/71/contact-us-accessories-international-team.jpg)