My Cart: 0 item(s)
![Corbin HGL18-6-E Master's Type Seat w/ Standard Trunkrest for Honda Goldwing 1800 '01-'11 Corbin HGL18-6-E Master's Type Seat w/ Standard Trunkrest for Honda Goldwing 1800 '01-'11](graphics/en-US/cssui/blank.gif)
Corbin's HGL18-6-E Master's Type Seat(With Heat) w/ Standard Trunkrest is made specifically for Honda Goldwing 1800 (2001-2011).
Features:
- Rider seating: 18" wide x 18" long, 22" vertical support
- Passenger: 19.5" wide x 10.5" long, 19" vertical support
- Corbin's Master's Type Touring saddle for Honda Goldwing 1800.
- Please note: When installing the Corbin saddle, it is very important that the seat mounting tab located near the front of the saddle goes UNDER the bracket on the chassis as shown in this photo. Saddle will not fit properly if this tongue is not located correctly.
![Seat Tab 'A' shown that must be located under bracket 'B'](graphics/00000003/82/corbin-hgl18-6-master-s-type-seat-w-standard-image13-short.jpg)
- INSTALL TIP: Start all the bolts before you tighten any up or else it will pull the seat one way or the other and the bolts won't go in at all.
- NOTE: The Corbin passenger backrest will not fit with the Hondaline passenger armrests installed.
- Saddle mounts like stock for simple installation. Seat heaters wire directly into an accessory jack in your stock wiring harness or we also have a model that plugs in directly to your Honda wiring if you have the Honda heat system.
![a person is holding seat , showing rear side heater wiring jack](graphics/00000003/82/corbin-hgl18-6-master-s-type-seat-w-standard-image14-short.jpg)
- Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
Regardless of whether your 'Wing is an '01 or an '11, we have the hot setup for your bike (no pun intended). When you're out piling up the mileage, the last thing you should ever be worried about is comfort. Honda provided a very luxurious ride when they created the latest evolution of The Wing, but it took the Corbin Wizard's to really nail the sweet-spot. Corbin's Master's Type saddle perfects the ride!
Check out the saddle dimensions at the bottom of this page... nearly TWO FEET of vertical back support in the rider's position and almost 19 inches for your copilot. Naturally we've designed the rider's backrest to have an angle adjustment so your can customize it to your posture. This Ovalbac model (exclusive to the GL 1800) has been specially designed for increased lower back support. Our rider's backrest fits into hardware concealed inside the saddle for a very clean look and simple installation. Notice also how the base of the backrest has been shaped to allow room for your passengers legs. A very well thought out design.
Nowadays everybody knows that Corbin backrests have an angle adjustment built in. But did you know that the special hardware concealed inside this saddle also allows the backrest to be positioned fore and aft? Additionally, it is spring loaded so it can fold down to ease mounting the bike. Forward positioning and angle adjustment are both very simple and can be done without removing the saddle from your bike.
In the saddle we've maximized each of the riding positions to provide the greatest area of body contact possible, thus spreading your weight over a greater area. This helps to eliminate hot spots and provides excellent support for the long rides. Both seating platforms have been ergonomically sculpted to spread weight properly and support your body.
Those early mornings trying to beat the motorhomes through Yosemite won't be a problem either, because we've built The Ultimate Accessory option for Honda's Ultimate Touring Machine... That's right, Bum Heaters! There's one in front for you and a separately controlled one for your passenger. The conveniently located switches allow two heat settings and are easily wired into your fusebox to the accessory jacks (wiring and detailed instructions included). If your Goldwing came from the factory with a heated seat (2006-2007 models have this option), then we have a special version of this saddle that plugs right into your bike and uses the Honda switches.
In the rear, you have a choice of our Standard Trunkrest or an extended trunkrest with passenger Armrests. Both offer sculpted support that gives a wide contact patch for your passenger. Either model bolts up easily to your stock trunk and works with the built in speakers. If you have the late model 'Wing with integrated heaters, then the trunkpad that comes with your system will also have a heater pad built in. A little more on this later.
All components of the Corbin saddle system are built up with our exclusive Comfort Cell® foam that provides firm support for the long haul. Comfort Cell® foam is specially developed for Corbin to provide support that won't break down and breaks in to take on your shape for a personalized fit.
For a truly luxurious feel, we include genuine leather seating panels that breathe with your body. Coordinated vinyl side panels keep the foam shape tight and the saddle looking new longer. Just remember to care for your saddle properly with regular conditioning using a product like our Saddle Cream. This will help your leather saddle to break in along with your foam shape, age gracefully and remain weather resistant.
About 2006-2010 Models: Congratulations on your new scoot! In 2006, Honda began offering the "Comfort Package" which includes seat heaters and switches already integrated into the bike. We make a heated seat design specifically for this setup so that it uses your Honda switches and plugs into the harness in place of the OEM seat. For this application, use our part number: HGL18-6-HE. This model includes a HEATED trunkrest in the slim style as shown directly below. If your 2006-2010 model did NOT come with the heat package, use our standard heated or non-heated models listed below.
Complete system with Standard Trunkrest: This setup includes Corbin's luxurious Master's Type Touring Saddle, a newly redesigned Ovalbac rider's backrest, coordinated Smooth Trunkrest, and seat heaters in both the rider and passenger seating areas. This is an excellent choice to maximize the comfort value in both the front and rear while keeping a clean line in the passenger area. Sculpted trunkrest gives a large area of body contact and excellent comfort. NOTE: For 2006-2010 models that came with Heater switches built in from Honda, this trunkrest is also heated!
![standard trunkrest shown](graphics/00000003/82/corbin-hgl18-6-master-s-type-seat-w-standard-image11.jpg)
Complete system with Trunk Armrest: This setup includes the luxurious Master's Type Touring Saddle with our cool new Ovalbac Rider's backrest, an extended Trunkrest with Passenger Armrests and seat heaters in the rider and passenger seating areas. This is an excellent choice if you really want to spoil your copilot on the long rides. Saddle and rider's rest are identical to the setup listed above, but the trunkrest has the addition of armrests for your passenger.
![trunk armrest shown](graphics/00000003/82/corbin-hgl18-6-master-s-type-seat-w-standard-image12.jpg)
LEATHER COLORS![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
LEATHER COLORS
![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS
![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
Specifications:
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.
COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.
Downloads
Installation InstructionsBest Sellers
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
![Call or WhatsApp 786-242-5400 Call or WhatsApp 786-242-5400](graphics/00000003/71/contact-us-accessories-international-team.jpg)