Call or WhatsApp 786-242-5400 | Mon-Fri 9-5 EST

Product Search

    Secure Checkout
    Corbin H-VTX-NEO-P Passenger Pillion for Honda VTX1800 Retro Neo '04-'09
      Corbin H-VTX-NEO-P Passenger Pillion for Honda VTX1800 Retro Neo '04-'09
      Purchase Corbin H-VTX-NEO-P Passenger Pillion for Honda VTX1800 Retro Neo '04-'09

      SKU: CBN-H-VTX-NEO-P
      MPN: H-VTX-NEO-P
      Corbin H-VTX-NEO-P Passenger Pillion for Honda VTX1800 Retro Neo '04-'09

      $444.00

      Custom Made for you. Ships in 2-4 weeks
       
      Corbin's H-VTX-NEO-P Passenger Pillion is made specifically for Honda VTX1300 Retro Neo (2004-2009).

      Front Seat sold separately.

      Features:
      • Measurements: Classic Solo seating: 15" wide x 14" long
      • Passenger Pillion: 11" wide x 12.5" long
      • Rider Seat height: 26.5"
      • Corbin Classic Solo Seat and pillion for Honda VTX 1800 Retro Neo.
      • Installation: Classic solo bolts up to your bike just like stock with brackets pre-mounted on the saddle. Corbin pillion pad comes completely ready to install and bolt to the Corbin Classic Solo. Rear of the pillion is held down to your fender in the standard location using the stock bolt or our ACST thumbscrew #ACST-6m (optional).
      • Our pillion does not work with the stock Honda front seat.
      • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
      Corbin's Classic Solo Saddle & Passenger Pillions give your VTX Neo a nostalgic look and excellent comfort. Provides the use of our removable backrest for 16 inches of vertical back support in the rider's position. Our sculpted seating position gives maximized body contact and provides true touring comfort with a bucket that gives plenty of body support. Our neutralized seat platform offers an easier reach to the ground and a more ergonomic position on the bike.

      For total touring support, we offer several styles of removable backrest that work in the Classic Solo. The Ovalbac® model backrest shown here is our model #02-S and provides the best blend of good looks and sculpted support. Ovalbac® models provide good support without trapping heat against your body... they also make a great hand hold while moving your bike around the garage. Simple to install, just slide the backrest shaft into the saddle and secure with the included setscrew. Backrest angle is adjustable to provide a tailored fit to your posture and adjustment is done without removing the backrest from the seat.

      Corbin's rear seat easily bolts up along with the Corbin solo and keeps a sleek, vintage look with excellent capabilities for passengers. We build this model to look sly, but use our high density Comfort Cell® foam for a firm supportive ride. Our pillion is ergonomically engineered for better weight dispersion and support. Naturally it is built to match your Classic Solo for a totally integrated look.

      Both saddles and backrest are richly tailored with genuine leather seating panels and built with Corbin's Comfort Cell® foam. Our exclusive foam material is almost twice as firm as the stock foam to give you support that lasts and doesn't compress down over time. This "Closed Cell" foam will feel firm at first, but over the miles you will notice it doesn't compress down like the stock foam and continues to provide resilience for the long haul. Additionally, it will break in over time to provide a personalized fit to your posture.

      Choose from a wide range of leather and decorating options (all included) for your new seat. Leather will provide a nice perch that breathes with your body and will break in along with the foam shape for a personalized fit. For an added bit of a nostalgic touch, specify Chrome Studs on your order like the model shown here (also at no additional charge). Corbin's backrest system works with or without a pillion saddle in place. Corbin pillion seats work with your VTX sissy bar if equipped.

      If you prefer a totally solo look, you can run the Corbin Classic Solo seat without a passenger pillion. This looks very nice on the VTX models showing off that flashy Tail Dragger style fender. Corbin's backrest is supported internally, so there are no unsightly brackets to clutter up the clean look of your bike. To keep things looking clean, chrome button head screws (not included) into the hole in your fender is a simple solution. Since the saddles install easily, you can simply convert your bike from this solo look to dual with just a few screws and a few minutes of your time.

      If you opt for one of the Ovalbac series backrests as shown here (model #02-S), you can further customize the look of you bike with rear finishing plate options. Made of ABS, our standard model has a leather look to it, but you can also choose a Carbon-Fiber look, Aluminum look or primer if you want to custom paint one. For just a little extra, we can provide a finishing plate prepainted to coordinate with your stock Honda paint job or a new Chromed steel model as shown. Please note, chrome back plates are only available for the model #02-S.

      Simple to install, passenger pillion mounts directly to the Corbin Classic Solo seat with all hardware included. The solo uses two brackets similar to your stock seat to mount directly to the frame locations originally used. You will reuse the stock bolts for this. To clean things up a bit, we offer a chromed billet thumbscrew in the proper thread (6mm) to fit your rear fender as shown. This looks very clean and can be installed or removed without tools. These thumbscrews can be used in a variety of applications wherever you want a dressier finish.

      Be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. With proper care, your seat will age gracefully developing a unique character and will be your riding buddy for years. Leather conditioner will help it to remain water resistant and supple over time. Beware not to use any cleaners or conditioners that are petroleum based or contain kerosene as this may damage the leather cover over time!

      LEATHER COLORS

      VINYL COLORS


      *Samples available on request. Don't hesitate to contact us.*

      It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

      Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

      Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

      Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

      Specifications:

      UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

      FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

      COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

      ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

      PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

      GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.


      Related Products


      Best Sellers


      Connect with our Team
      Questions?

      Call or WhatsApp: 786-242-5400 📞

      Call or WhatsApp 786-242-5400