My Cart: 0 item(s)
![Corbin CA-R-LM-E Rear Seat, with Heat for Can-Am Spyder RS / ST Lamonster Cut (2008-2016) Corbin CA-R-LM-E Rear Seat, with Heat for Can-Am Spyder RS / ST Lamonster Cut (2008-2016)](graphics/en-US/cssui/blank.gif)
Corbin's CA-R-LM-E Rear Seat, With Heat is made specifically for Can-Am Spyder RS / ST Lamonster Cut (2008-2016).
Features:
- Measurements: Rider seating: 16" wide x 17" long
- Passenger: 15" wide x 11" long
- Two piece saddle system works with the OEM passenger backrest or a Corbin adjustable backrest in the rear.
- High density Comfort Cell foam provides firm support and a clean, low profile.
- More square inches of body contact area eliminates hot spots.
- Neutralized seating platforms curb the tendency to slide in the saddle.
- Genuine leather seating in a range of color and style options at no extra charge.
- Comes standard with Spiderweb stitching in choice of colors. For a more subtle appearance use black on black stitching or Tuck & Roll stitch.
- Newly redesigned with a fuel door so you can gas up the bike without dismounting.
- Front seat hinges like the stock unit. We use a rigid prop-rod as shown to support the seat in upright position.
- Front seat latches on stock key lock, Rear seat uses integrated Corbin key lock for installation / removal.
- Special Lamonster version of Corbin RS seat shown.
- Special logo comes standard on Lamonster Cut saddles.
- Front saddle mounts with included hinge and is designed to use an integrated rigid prop arm. Once installed, Corbin seat will hinge up providing under seat access as needed.
![Corbin Front seat with backrest installed](https://www.accessoryinternational.com/merchant2/graphics/00000003/76/corbin-ca-s-2-front-seat-no-heat-image12-short.jpg)
- Passenger seat installs with Corbin integrated key lock system. All brackets and required components are included and install easily with common hand tools.
![a person holding the rear seat showing rear side with wiring harness and mounting brackets pre-installed](https://www.accessoryinternational.com/merchant2/graphics/00000003/76/corbin-ca-s-2-front-seat-no-heat-image13-short.jpg)
- Passenger sensor transfers from the OEM seat onto the Corbin rear saddle with just two bolts.
![Rear seat closeup showing wiring harness and two bolts](https://www.accessoryinternational.com/merchant2/graphics/00000003/76/corbin-ca-s-2-front-seat-no-heat-image14-short.jpg)
- Corbin's passenger seat does not work with the BRP rear seat cowling.
- Corbin's saddle system works with the BRP passenger sissybar / backrest system and the optional luggage rack platform.
- Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
It didn't take Spyder riders long to figure out a comfort injection was needed for the new Can-Am street bike. For all of its technical prowess and Transformer-like visuals, the good folks at BRP left a bit to be desired when it comes to the rump rest. Fortunately, we knew just what to do about that!
We started by designing a two piece saddle to replace the oem single piece seat. For both, we developed a concave seating surface that conforms to the shape of your body and eliminates pressure points. This also spreads body weight over a greater area giving more square inches of body contact and support. Additionally, both positions are neutralized to curb sliding which reduces rider fatigue.
As you can tell, this ergonomically designed shape provides a very nice visual effect that flows with the bike's sleek lines. Our Fibertech base material allows us to provide a perfect fit to every arc and contour of the Spyder bodywork while being rigid enough to support the carefully designed foam shape. Fibertech also provides the structural integrity needed for our internal backrest support system.
Corbin backrests (optional) are designed to install easily and lock in place with a single bolt. Built in angle adjustment allows Corbin backrests to be tailored to your riding posture quickly and easily. Use a single backrest to transfer front to rear as needed, or order two backrests for full time use. Choose from a variety of backrest styles to suit your taste. We show two models above; the #297-B standard model and #02-SB Ovalbac model. Corbin's passenger seat will also work with the BRP backrest / luggage rack system in place.
Naturally, Corbin backrests are tailored to match your new Corbin saddle and provide an integrated look. Models like those shown provide contoured support and maximum amount of body support. These models also offer finishing plate options to further customize the look of your Spyder. Backrests come standard with a leather look ABS finishing plate that can be ordered custom in a variety of styles... even paint matched for a little extra.
Front saddle was redesigned in 2011 to allow access to the fuel filler without unlatching the seat. This allows riders to stay seated on the bike while they fill up at the gas station. Fuel door is constructed of durable ABS and mounts to the seat with a Euro style hinge that allows it to open fully out of the way and close without the hinge showing.
For an added bit of luxury, we've designed the front and rear saddles with the option of electric heat! Simple to install with all components built into the saddles. You just have to install a simple wiring pigtail on your bike and enjoy the warmth. A great feature to have when you're taking off early in the morning to beat the traffic! Convenient switch is located on the left side of the saddle. Once on, the saddle will warm up and maintain temperature automatically though an integrated controller. Both front and rear seats are available heated (or non-heated) and have separate switches to control them.
Saddles use our exclusive high-density Comfort Cell foam that allows us to build a supportive saddle without a bulky shape. Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. On top, we include genuine leather seating in a variety of styles. If a clean, stealthy look is your thing go straight black... if you'd like something a bit more custom, we have many styles and colors available at no added cost. All styles include custom Corbin Spyder logo embroidered in the side panel and Spider web stitching in choice of thread colors.
Simple installation with all required brackets included. Front seat uses Corbin designed hinge that bolts to a stock location on your bike and uses our own fold away prop-rod to keep the seat open. Once installed, seat will open to provide access to the fuel tank just like your stock seat or you can use the conveniently located access door. Rear saddle mounts using a built in Corbin key lock system that integrates to a bracket mounted to the Spyder. Passenger sensor is transferred from the bottom of the stock seat onto the Corbin passenger seat with just two screws.
Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain black or prepainted (at additional cost).
These saddles are also available in a Lamonster Cut that was designed specifically for Lamonster at SpyderLovers.com. Lamonster Cut saddles also feature the Lamonster logo stitched in the side panel.
LEATHER COLORS![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
LEATHER COLORS
![](graphics/00000003/84/corbin-seat-leather-colors.jpg)
VINYL COLORS
![](graphics/00000003/84/corbin-seat-vinyl-colors_2.jpg)
![](graphics/00000003/84/corbin-seat-vinyl-colors-2_2.jpg)
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
Specifications:
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.
COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.
Downloads
Installation InstructionsRelated Products
Best Sellers
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
![Call or WhatsApp 786-242-5400 Call or WhatsApp 786-242-5400](graphics/00000003/71/contact-us-accessories-international-team.jpg)