My Cart: 0 item(s)
Corbin's BMW-R12RT5-LOWE Low Seat, Heated is made specifically for BMW R1200RT (2005-2013).
Features:
- Rider Seating: 15" wide X 13" long
- Back Support w/ #02-S: 15"
- Back Support w/o #02-S: 7"
- Passenger Seating: 11.5" wide X 10" long
- Approx. Seat height: 30.5"
- Corbin LOW Dual Tour saddle for BMW R1200RT.
- Provides a lower seat height for improved ground reach and accepts two optional rider backrests.
- Dual ergonomically sculpted seating positions provide excellent weight distribution and long range support.
- Use a single backrest transfered front to back as needed or get two for full time use.
- Fits perfect to the BMW bodywork for a truly custom touch.
- Rider seating offers excellent back support and improved reach to the pavement.
- Includes genuine leather seating in natural grain leather or designer cover pattern.
- Neutralized seating positions curbs sliding in the saddle and reduces fatigue.
- Genuine leather comes in a wide variety of styles and colors to choose from at no extra charge.
- Shown here: Carbonium center stripe, natural grain black leather, black faux alligator and asphalt side panels.
- Rider's seating area offers seven inches of back support... fifteen inches with backrest installed!
- Glovebox addition for the Corbin backrest provides convenient, locking storage for small essentials.
- Narrow nose eases ground reach.
- Saddle installs easily with a tab in the front and latch in the rear that integrates with the BMW key lock.
- If you opt for electric heat, the heaters, controller and switch will come preinstalled in the saddle. You only have to wire the included pigtail to your motorcycle (complete instructions included).
- When an RT is converted to use the BMW Low seat, there are brackets removed to allow for a lower seat base. This will also need to be done for the Corbin seat. Likewise, because of this our standard seats won't fit the Lowered model unless you get the proper brackets from your BMW dealer.
- Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
If you're currently sporting the BMW Low seat option or considering converting your RT to that configuration, this is the seat model for you. What BMW has done, is remove some of the brackets and adjustable nature of the front seat and provided the lowest perch possible on the chassis. What WE'VE done is taken the same concept and made it as comfortable as possible by using a higher density foam and sculpting the shape for contoured support.
Our high density Comfort Cell foam allows a sleek profile while providing a firm supportive ride that lasts. Rider seating is designed ergonomically to fit the curve of your body for better weight distribution. This also helps to eliminate the centralized pressure felt from the OEM seat. In the nose we sculpt the saddle narrow to allow for good ground reach. Not only have we managed to improve the quality of your ride, but the contoured shaping of the saddle provides a very clean look on the bike as well.
Both the rider and passenger seating areas have the option of a removable backrest for added support and feeling of security. Saddle can use a single backrest transferred front to back as needed or will work with two backrests full time. Corbin backrests are simple to install requiring just a single bolt and are adjustable to provide a tailored fit to posture. Choose from a variety of backrest styles to suit your taste. The #02-SB models shown here offer a very good combination of clean looks with a generous nine inches of vertical support.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. This gives your passenger excellent comfort. The addition of built in backrest support hardware gives your passengers an additional feeling of security while riding too.
Notice how close the Corbin saddle fits to the tank, tail section and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape.
For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's battery. All other components are built into the saddle and come preinstalled.
On top, we include genuine leather seating panels for a luxurious ride. Our standard design includes Black natural grain leather seating with coordinating vinyl sides and nose for clean, sporty looks. If you'd like something a bit more custom, we also offer a designer model (shown) that features: Black Faux Alligator seating, Natural Black Trim, Carbonium center stripe and Asphalt side panels at no additional cost. A variety of colors and materials are available by special order. All models include moto-sport themed Corbin logo embroidered in side panel.
We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.
Mounts to the motorcycle just like stock and secures with the BMW key lock system. All brackets are included and premounted on the seat so it's ready for immediate installation. If you opt for electric heat, all components will be built into the saddle and we will include a wiring pigtail for simple installation. Complete directions included.
Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-SB backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.
About ground reach: You've probably already seen the BMW seating arch & leg curve information... they did a great job of describing how a simple seat height measurement doesn't always give the whole story. For sake of argument, the Corbin low seat is roughly the same as the BMW Low seat, but we did find a little bit of additional ground reach in there. If you refer to the last animation above you will see how the change in seat shape has made reaching the pavement just a smidge easier.
LEATHER COLORS
VINYL COLORS
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
LEATHER COLORS
VINYL COLORS
*Samples available on request. Don't hesitate to contact us.*
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
Specifications:
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.
COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.
Downloads
Installation InstructionsBest Sellers
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
