My Cart: 0 item(s)
When riding in rocky or rugged terrain, it’s possible to side swipe a rock with either your front or rear rotor as you maneuver around it. If that happens your rotor can become damaged or warped, impacting the reliability and ease of use of your brakes, possibly effecting your safety. A bent rotor will cause aggressive wear to your brakes. The Altrider KT22-6-1128 Front and Rear Rotor Guard, keep your rotors protected from unintentional hits.
By removing any unnecessary material, it's one of the lightest guards on the market that minimizes surface area for mud to stick to. The Front rotor guard only adds 13 oz (0.36 kg), and the Rear adds a minimal 6 oz (0.17 kg) in weight because it replaces the rear brake hanger for a well-integrated system for true structural support.
Front Rotor Guard
The front fastens to the robust 22 mm axel, maximizing strength & stiffness. It replaces the left side spacer with a strong 8.5mm thick hub mount while maintaining the critical seal at the wheel bearing. The guard mounts to the hub with 2 M6 fasteners and uses 3 points of positive engagement. This creates maximum protection against lateral hits, and the support beams provide protection against direct hits. The guard covers the leading edge of the rotors, along the front and bottom, where your most likely to endure a hit.
The Rear Rotor Guard
The rear also attaches to the robust 20 mm, 22mm, or 25 mm axel and replaces the rear brake hanger with a custom, intelligently designed hanger to maximize strength, while keeping weight down. The AltRider design doesn’t use the OEM hanger as its simply not designed to take an impact.
- Made from lightweight aluminum
- The front only adds 13 oz (0.36 kg)
- The rear adds 6 oz (0.17 kg) of weight
- Optimized balance between weight and protection
- Precision CNC machining to ensure an exact fit and tight integration with the OEM rear brake caliper
- Installation is straight forward
- Servicing your brakes or forks is just as easy as it is without the guards on
Fitment:
Font Guard Fitment
Designed for use on 22mm axle
KTM SX/SXF/XC/XCF (2015)
KTM All Models 125-500 (2016–Current )
Husqvarna All Models 125-501 (2016–Current)
GAS GAS Current All Models (2021)
Rear Guard Fitment
Designed for use on 20mm, 22mm, and 25mm rear disc guard
KTM: Current All Models (2004–)
Husqvarna: 125–501 All Models (2014–Current)
GAS GAS: Current All Models (2021–)
Compatible with the all-new Braketec brake calipers found on model EXC/XC-W (2022–Current)
Best Sellers
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
