home | contact
call your order at: 888.725.3679    
:: Honda
:: Yamaha
:: Kawasaki
:: Suzuki
:: Harley Davidson
:: Gifts and Novelties
 
We accept
Visa, Mastercard,
American Express,
and Discover.
Click here to apply now!
 

 

THIS PAGE IS NO LONGER BEING UPDATED
CLICK HERE TO VISIT OUR CURRENT UPDATED SITE

Clamp On Footpegs

Footpegs With Offset Mounts and Magnum™ Quick Clamps



These highway pegs utilize our unique offset mount to allow riders a range of adjustment not possible with other clamp-on style highway pegs. The offset can be rotated 360 degrees in a 4 diameter circle to accommodate tall, short, or average height riders. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, look at our Right Angle Mounts.

Helpful Hint: If you are unsure of the diameter of the tubing on which you'd like to install the highway pegs and don't have a dial at your disposal, here is an easy way to figure it out. You'll need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1" apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8", 1-1/4", and 1.35" until you find one that will fit.


Small ISO®-Pegs with Offset Mounts and Clamps (pair)
Part# Description
KY7998 1-1/4" diameter clamps
Large ISO®-Pegs with Offset Mounts and Clamps (pair)
Part# Description
KY7999 1-1/4" diameter clamps
KY7933 1.35" diameter clamps
Dually ISO®-Pegs with Offset Mounts and Clamps (pair)
Part# Description
KY7976 1" diameter clamps
KY7966 1-1/8" diameter clamps
KY7993 1-1/4" diameter clamps
KY7920 1.35" diameter clamps
Pilot™ Pegs with Offset Mounts and Clamps (pair)
Part# Description
KY4438 1" diameter clamps
KY4437 1-1/8" diameter clamps
KY4436 1-1/4" diameter clamps


Footpegs With Clevis and Magnum™ Quick Clamps


This is our most popular style of highway pegs. Using Kuryakyn's Magnum Quick Clamp, they are a snap to install and provide long-haul comfort. There are several styles of footpegs to choose from with various size clamps to accommodate most common engine guard diameters. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, check out our right angle mounts.

Helpful Hint: If you are unsure of the diameter of the tubing on which you'd like to install the highway pegs and don't have a dial at your disposal, here is an easy way to figure it out. You'll need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1" apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8", 1-1/4", and 1.35" until you find one that will fit.


Large ISO®-Pegs with Clevis and Clamps (pair)
Part# Description
KY8033 1-1/4" diameter clamps
KY8031 1" diameter clamps
Dually ISO®-Pegs with Clevis and Clamps (pair)
Part# Description
KY4510 1" diameter clamps
KY7988 1-1/8" diameter clamps
KY7992 1-1/4" diameter clamps
Small ISO®-Pegs with Clevis and Clamps (pair)
Part# Description
KY8032 1-1/4" diameter clamps
KY8030 1" diameter clamps
Pilot™ Pegs with Clevis and Clamps (pair)
Part# Description
KY4439 1" diameter clamps
KY4435 1-1/4" diameter clamps


Footpegs With Right Angle Mounts and Magnum™ Quick Clamps




This mount is the answer for motorcycles with an engine guard that does not allow the installation of a traditional style highway peg. Most highway pegs position the peg perpendicular to tubing to which they are mounted, thereby limiting their use to engine guards that run vertically. The Right Angle Mount overcomes this limitation and will allow you to position the peg horizontally regardless of the orientation of the engine guard.

Helpful Hint: If you are unsure of the diameter of the tubing on which you'd like to install the highway pegs and don't have a dial at your disposal, here is an easy way to figure it out. You'll need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1" apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8", 1-1/4", and 1.35" until you find one that will fit.


Short Right Angle Mount with Clamp and Small ISO®-Pegs
Part# Description
KY4513 1" diameter clamps
KY4517 1.25" diameter clamps
Short Right Angle Mount with Clamp and Dually ISO®-Pegs
Part# Description
KY4516 1" diameter clamps
KY4514 1.25" diameter clamps
Long Right Angle Mount with Clamp and Small ISO®-Pegs
Part# Description
KY4507 1" diameter clamps
KY4504 1.35" diameter clamps
Long Right Angle Mount with Clamp and Dually ISO®-Pegs
Part# Description
KY4509 1" diameter clamps
KY4506 1.35" diameter clamps


H-D Type Footpeg Adapters with Adjustable Stop


We have modified our standard H-D type male footpeg adapters with an adjustable stop which now makes it possible to install conventional clamp-on highway pegs on an engine guard that would normally cause the pegs to angle down toward the ground. We have added a small setscrew to the "heel" of the adapter. By adjusting the position of the setscrew, the angle of the footpeg can be adjusted. Best suited for use with Kuryakyn Footpegs with Clevis and Magnum Quick Clamps.

Part# Description
KY8008A H-D Type Male Footpeg Adapters with Adjustable Stop (pair)

Accessories International
13343 SW 131 ST
Miami FL 33186
Toll Free: 888-725-3679 (M-F 9AM-7PM EST)
Fax: 786-242-4151 Int: 786-242-5400
http://www.accessoryinternational.com
info@accessoryinternational.com