THIS PAGE IS NO LONGER BEING UPDATED
CLICK HERE TO VISIT OUR CURRENT UPDATED SITE

Turn Signals and Marker Lights

Dot Approved Turn Signals DOT approved turn signals are exact replacement of complete OEM assemblies Available for most Hondas, Kawasakis, Suzukis, and Yamahas Call with applications (888)725-3679

Universal Halogen Silver Bullet Super bright, single filament 35 watt halogen bulbs feature built in, faceted "diamond cut" reflectors. These universal kits come with basic hardware, ready to attach to bracketry of your own creation. Comes with red, amber (yellow), and clear lens. Works well with Rizoma Indicator Supports. Small Silver Bullets measure 2-7/8"x1-5/8" Large Silver Bullets Measure 4" x 2 5/16" Sold in pairs

Handlebar Mounted Lights L.E.D. Universal Silver Bullet Kits with 3/8"-16 Hollow Mounting Bolt The power wire exits the light through the mounting bolt. The light is grounded through its mount. Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill for many applications. Our Mounting Kit and P-Clamps are great for fender and fork applications. L.E.D. Kits have Clear Lenses; the color is emitted by the L.E.D. circuit board. Colored lenses are available but do not change the color emitted. L.E.D. kits also include a load equalizer Small Silver Bullets measure 2-7/8"x1-5/8"

Mini marker lights They mount directly to the handlebars- the back surface perfectly fits the contour of 1" bars. Drill just one hole through the bars for secure mounting. Single or twin single-filament bulbs with amber lenses. CC09141 Single Bulb  CC09142 Twin Bulb

Kits with marker lights & clamps For 39mm or 41mm fork tubes. Single or twin 12-volt bulbs and amber lenses. Sold in pairs. Single Bulb  Twin      Bulb    PUDS280144  PUDS280147  39mm  PUDS280149 PUDS280150 41mm

12 Volt Marker Lights These 12-volt marker lights  feature die-cast construction, flawless chrome-plating. They're available in single or twin bulb versions with your choice of red or amber lenses, and were designed to mount flush to flat surfaces like struts or the sides of fenders. They measure 5-1/2" long by 1-1/4" wide by 1" tall. Sold in pairs. Red Amber Desc. CC09062 CC09060 Single Bulb CC09063 CC09061 Twin Bulb

Wedge Marker Lights These chrome-plated wedge-shaped marker lights feature unique styling and die-cast construction. They are available with red and amber lenses and have single filament bulbs. They measure approximately 3-1/2" Long by 1-1/4 " wide. Comes with amber and red lenses. Sold in pairs. Part# PUDS 280051

Chrome die-cast  housing and contoured lens Flush mount design is ideal for fender struts, fender sides or saddlebags. They measure 5-1/2" long by 1-1/4" wide by 1" tall. Sold in pairs Part# CC09111

Rizoma Indicator Lights Billet Aluminum. Available in polished, natural anodized and black anodized. Works well with Rizoma Indicator Supports. Sold each. Part# Desc RIF100 Polished RIF100A Anod. RIF100B Black

Custom Marker Lights Two piece housing clamp securely to the fork tubes and include plastic sleeves for universal attachment to 35mm or 41mm fork tubes. Dual Filament bulbs. Available with amber lens. Sold in Pairs. Part#: PUDS280191

Wedge Slanted Marker Lights Smooth contoured marker lights are perfect for fender strut or saddlebag mounting. Design blends well with most flat surfaces. 12 volt dual filament kit include both amber and red lenses, mounting hardware and gaskets. Meaures 9"x1" Sold in pairs. Part# CC27616

Fork Mount Side View Amber Marker Lights Chrome 12 Volt dual bulb marker lights mount to 35mm, 39mm or 41mm fork tubes with integral bracket and includes spacers and hardware. Sold in pairs. Part#: CC15083

LED Turn Signal Conversion Upgrade your stock turn signals by simply switching your stock bulb with this new LED model Available in red or amber, with single function Part# Description Price BAPSC40ASR LED: Turnsignal conv.; Red (pair) $89.95 BAPSC40ASY LED: Turnsignal conv.; Yellow (pair) $89.95

Bullet Marker Light  Chrome-plated die-cast aluminum Slick cone design with single or dual bulbs Available in smooth or grooved styles Includes amber and red lenses 3" L x 2 1/8" diameter Sold each Part# Description PUDS285120 Smooth, single bulb PUDS285121 Smooth, double bulb PUDS285122 Grooved, single bulb PUDS285123 Grooved, dual bulb

Bullet Marker Light  Smooth or ball-milled designed die-cast body 1.20" diameter body with over-all length of 3" Includes impact-resistant amber lens, 12V/10W single-filament bulb with 5/16" hollow mounting bolt Available in four replacement color lenses: clear, red, blue and amber Lights and lenses sold in pairs Part# Description   PUDS282040 Smooth marker lights $34.99 PUDS282041 Ball mill marker lights $34.99 PUDS282042 Red lenses $4.99 PUDS282043 Blue lenses $4.99 PUDS282044 Clear lenses $4.99 PUDS282045 Amber lenses $4.99

Chrome Turn Signal Relocation Clamps for Harleys Manufactured from 6061-T6 aluminum, polished and then chrome-plated to a show finish Relocates original Harley front turn signals from the handlebars to the fork tubes (5/16" mounting holes) Includes stainless steel hardware Available for 35mm, 39mm and 41mm fork tubes Sold in pairs Description Part# 35mm PUDS280221 39mm PUDS280222 41mm PUDS280223

Universal Fork-Mount Marker Light Brackets Chrome-plated brackets allow mounting of marker lights on 35-39mm fork tubes Complete with all necessary hardware, lights sold separately. Part# PUDS285052

Relocation Clamp Kits These clamp kits are perfectly suited for use in relocating your OE turn signals from your handlebars or triple trees to your front forks They come complete with all necessary hardware and bolt-on in minutes Sold in pairs Description Part# 39mm CC09148 41mm CC09149

Marker Light Fork Mounts One slick little clamp, our chrome plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets, Hornet Deer Alerts or other items to fork tubes, frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory. The clamp has a 5/16" mounting hole. KY4017 fits both 39mm and 41mm fork tubes. Sold Each Part# KY4017

Marker Lights Bar Chrome-plated mounting bracket mounts marker lights or many other types of lights to licenses plate Sold individually Part# PUDS280079