THIS PAGE IS NO LONGER BEEN UPDATED
CLICK HERE TO VISIT OUR CURRENT UPDATED SITE

Handlebars for Cruisers

 

UNIVERSAL FATTY BAR FITS VARIOUS METRIC CRUISERS Part# BA7301U 6" Risers w/Pullback (Picture A) Pre drilled to run wires inside handlebar for that unique custom look 1.25" diameter on exposed handlebar, 1" diameter at the grip and switch housing area Overall width: 32" Mounts with two 0.5" diameter bolts, included Center to center spacing of mounting risers is 4" 6" rise with 1.5" pull back on the riser 5.5" pullback on handlebar Will fit V-Stars and Road Stars without any modifications Will fit Honda Shadows with minor modifications (always check tank clearance before modifying CLICK HERE TO GO TO OUR NEW SITE Part# BA7302U 3" Risers (Picture B) Same as 5" risers except that it does not have pull back on riser and it is only 3" tall CLICK HERE TO GO TO OUR NEW SITE

Part# BA7305U Radi'us Bar (Road Star, V-Stars - 650/1100) Radi'us drag bar gives you the best of both worlds - radical look with comfortable riding position Mounts with two 0.5" diameter bolts, included Center to center spacing of mounting risers is 4" A fat 1-1/4" in diameter, this bar has ends made specially for use with Yamaha stock controls May be used with stock hoses/lines CLICK HERE TO GO TO OUR NEW SITE

1" T-Bars T-Bar Style 1 1/4" diameter tapers to 1" to accept stock switches and grips Will fit Kawasaki Vulcans with minor modifications (always check tank clearance before modifying) Predrilled for wiring 3 1/2" Bolt center to center spacing on risers Will fit various models with minor modification, check tank clearance Requires 0.5" mounting bolts, sold separately, click here for bolts Part# Rise End Rise Width Center Width Pullback PUDS300331 6" 4.0" 31.0" 8.5" 10.5" PUDS300332 8" 5.0" 31.0" 8.5" 11.5" PUDS300333 10" 6.0" 31.0" 8.5" 12.5" CLICK HERE TO GO TO OUR NEW SITE

BIKINI BARS Get retro with these '40's style handlebars Constructed of 1" diameter steel tubing with knurled center Highly polished, brilliantly chrome plated Made in the U.S.A. *This item is oversized. The order form will not calculate correct shipping and handling. If you do use the order form you will be contacted about the shipping and handling. Style Height Pullback Center Width Width Part# 1" Dimpled and drilled 4.5" 12.75" 8" 36" PUDS300248 1" No Dimples 4.5" 12.75" 8" 36" PUDS300238 CLICK HERE TO GO TO OUR NEW SITE

CLASSIC BENDS All handlebars are made of seamless, cold-drawn steel tubing Mandrel bent for accuracy, then chrome plated to perfection All bars are unknurled and are 1" *This item is oversized. The order form will not calculate correct shipping and handling. If you do use the order form you will be contacted about the shipping and handling. Style Height Pullback Center Width Width Part# Original Apehanger 12.5 10 8.5 34.5 PUDS300117 Tall Apehanger 13 10.5 11 35 PUDS300119 Mini Apehanger 10 10 8 34.25 PUDS300146 CLICK HERE TO GO TO OUR NEW SITE

DRAG BARS All handlebars are made of seamless, cold-drawn steel tubing Mandrel bent for accuracy, then chrome plated to perfection All bars are unknurled and are 1" *This item is oversized. The order form will not calculate correct shipping and handling. If you do use the order form you will be contacted about the shipping and handling. Style Height Pullback Center Width Width Part# Wide Clubman 2.5 7.5 8.5 31.5 PUDS300324 Narrow Clubman 2.5 7 5.75 28.75 PUDS300327 Cafe 2.75 7 7 34.75 PUDS300192 Low Cafe 2.5 5 4.75 32.5 PUDS300202 CLICK HERE TO GO TO OUR NEW SITE

BEACH BARS All handlebars are made of seamless, cold-drawn steel tubing Mandrel bent for accuracy, then chrome plated to perfection All bars are unknurled and are 1" *This item is oversized. The order form will not calculate correct shipping and handling. If you do use the order form you will be contacted about the shipping and handling. Style Height Pullback Center Width Width Part# Beach Grande 4.5 17 10.5 38.5 PUDS300320 Beach/Knucklehead 3.5 10.25 5.5 32.5 PUDS300194 CLICK HERE TO GO TO OUR NEW SITE

7/8" Handlebars All handlebars are made of seamless, cold-drawn steel tubing Mandrel bent for accuracy, then chrome plated to perfection All bars are unknurled Style Height Pullback Center Width Width Part# Drag 0 3.5 5 27.75 PU65004101 Superbike 2.5 5 4.5 29 PU65004201 GP Touring 2.5 6.75 5 28 PU65004301 Euro 3 5.75 4.5 30 PU65004401 Daytona Touring 2.5 7 5 29.5 PU65004601 CLICK HERE TO GO TO OUR NEW SITE

CWHANDLEBAR RISERS New style risers, made of chromed billet aluminum Available in three sizes: 3", 4" and 5" Fits VL1500 Intruder, Roadstar, Vstar 1100 Classic/Custom Size Part# 3" CW05143 4" CW05144 5" CW05145 CLICK HERE TO GO TO OUR NEW SITE CLICK HERE TO GO TO OUR HANDLEBAR RISERS PAGE

CWHANDLEBAR RISERS Billet aluminum Attach under original risers Intruder model - space for wires inside Fits Part# VT1100C 87-97 CW01001 VN800/1500 Classic CW02001 VS1400 87-99 CW03001 Virago 1100 CW04001 CLICK HERE TO GO TO OUR NEW SITE CLICK HERE TO GO TO OUR HANDLEBAR RISERS PAGE

CHROME HANDLEBAR AND RISER MOUNTING BOLTS Mounting bolts are avilable in hex or Allen head styles Fits Part# Hex Bolt 0.5" x 2.5" (pair) PUDS430574 Hex Bolt 0.5" x 2.75" (pair) PUDS430575 Hex Bolt 0.5" x 3" (pair) PUDS430576 Allen Bolt 0.5" x 2.5" (pair) PUDS430580 Allen Bolt 0.5" x 2.75" (pair) PUDS430581 Allen Bolt 0.5" x 3" (pair) PUDS430582 CLICK HERE TO GO TO OUR NEW SITE CLICK HERE TO GO TO OUR HANDLEBAR RISERS PAGE Back To Handlebars